faux fur slip through scarves

As an Amazon Associate I earn from qualifying purchases.

I have adored Anneliese and her lovely blog, Aesthetic Nest, for as long as I can remember. Her meticulous detail (isn’t that piped pocket below lovely?) , mastery of making everyday things pretty (we need some of those pretty paper covered comp books around here!), and party planning talent (where to start? This chevron-and-dot party is perfection, and I am completely smitten with this vintage book party) are all just gush-worthy. My favorite posts at Aesthetic Nest, however, are the “FYI” posts where Anneliese takes a minute to share her musings (love this reminder of how green the grass really is, right here and now). We’d be friends in real life, I just know it.
winter whites guest- annelieseWhich leads me to the great news that Anneliese is here today for Winter Whites, sharing a faux fur slip through scarf tutorial-

I love white in any season–before or after Labor Day–but it is especially beautiful in Winter. I have always been a fan of a reduced palette: whites, neutrals, tints. So when Kirstin asked me to join Delia and her in their Winter Whites series I was thrilled. Not only to participate, but also to see how others are inspired by a whitewashed Winter palette.
My creativity these days (on my blog and off) is centered on my family, predominantly my three little girls, so I predictably thought about making something for them: Faux Fur Slip-Through Scarves. I’m such a sucker for animal prints and textures.
I made some Faux Fur Infinity Scarves before Christmas in rich browns and was excited about the idea of using faux fur in white once January arrived. So I hunted and found some great fabric from this Etsy seller and bought enough to make myself a White Faux Fur Infinity Scarf (Audrey is wearing it above) and a Slip-Through Scarf in a child-size. And why not one in light pink too?

 

I love these slip-through scarves because they go on so easily, and they stay on. And this light and fluffy variety is pretty fun to wear.
I’ve got a tutorial for making a Faux Fur Slip-Through Scarf for you or your little girl. Or one for each of you! And all your friends…
This is a pretty easy and quick project but if you haven’t sewn with it before you may want to check out my tips for sewing with faux fur in this post before beginning. They make a big difference in cutting down the mess and making sure the final product is just what you had in mind.
FAUX FUR SLIP-THROUGH SCARF TUTORIAL
You’ll need:
  • Faux Fur fabric (see dimensions for pattern pieces below)
  • Lining fabric such as polyester charmeuse, or a knit or even fleece (see dimensions below)
  • Coordinating thread

 

To start, draw and cut out TWO PIECES of your faux fur according to the size you are making:
Small child: 15.5″x 4.5″
Bigger child: 16.5″ x 4.5″
Adult size: 20″ x 4.5″
Cut ONE PIECE of your lining fabric:
Small child: 30.5″x 4.5″
Bigger child: 32.5″ x 4.5″
Adult size: 39.5″ x 4.5″

 

Orient your pieces of faux fur short ends together with the hairs running opposite directions as shown in the photo above. You will pin sew (with a .25″ seam allowance) these two pieces right sides together along this short edge to form the back center seam. The fur should then run down on both sides of the scarf when your little girl is wearing it.
Here is a photo of the finished seam (above).
Now you will want to brush or comb all the fur away from the long edges towards the center of the scarf…
…and then pin the lining piece to the faux fur, right sides together. Stitch all the way around the scarf using a .25″ seam allowance. But LEAVE A 3″ OPENING on one side of the center/back of the scarf for turning.
Clip the corners. You can zigzag stitch all the was around your seams if you’d like for added strength on these seams.
Turn your scarf right side out and brush out any hair caught in the seams.
Tuck in the raw edges of your faux furn and lining at the opening, pin, and topstitch close to the edge.
The pile of your faux fur will make this stitching virtually invisible.
Now to create the slit for the slip-through you will create what is essentially a giant buttonhole.  Mark a  3″ line in the center of one of your scarf ends as shown in the photo above. Pin the top and the bottom of what will become the 3″ opening. This opening should be the follow distance up from the end of the scarf:
Small child: 3″ from the bottom
Bigger child: 4.5″ from the bottom
Adult size: 8″ from the bottom
Brush away all the “hair” from this line so you can see the backing to sew on. This will make your stitching nearly invisible.

 

Set your sewing machine for a zigzag stitch about 1/8″ wide and shorten your stitch length so it is almost a satin stitch. You can practice on a scrap piece of fabric to see if the zigzag is dense enough to form a buttonhole.
Start at the top of the opening marked by your pin and zigzag stitch in a straight line down to the other pin. Pivot and zigzag stitch for 1/4″. Pivot again and stitch up to the top of the opening parallel to your first line of zigzag stitching. These lines of stitching should nearly touch. Pivot at the top and sew across the ends of these two lines of stitching. You’ve just made a manual buttonhole!
Use a seam ripper or small snips with your scissors to open this slit, just as you would open a buttonhole.
Voila! Pretty cool, right?
And when the pile falls back into place, the stitching can’t even be seen. So easy!
Now you can slip the opposite end of the scarf through this opening and secure it around your neck. Super soft and warm. I hope it adds some nice color to the rest of your winter.
Thanks so much for having me in Winter Whites! It’s always a pleasure to participate and watch a Delia Createskojodesigns series!
neutral valentinesSpeaking of Delia’s- there are some gorgeous neutral valentines over there today as part of Winter Whites- head on over and check them out.

Similar Posts

10 Comments

  1. Pingback: Printed Blog

Leave a Reply

Your email address will not be published. Required fields are marked *